Every Stud Welding Component Your Project Requires
Weld studs, shear connectors, wear studs, ceramic ferrules, and the equipment that welds them — one factory-direct catalogue, built to AWS D1.1, EN ISO 13918, ASTM A29, and CE standards, shipped to 60+ countries.
One Factory, Complete Stud Welding Ecosystem
Every product on this site is produced on the same manufacturing base — cold heading, CNC threading, heat treatment, and ceramic kiln firing under one roof. That means the shear stud, the welding gun, and the ceramic ferrule you specify for a single project all come from one accountable source, with one quality standard behind every part.
Every process stage happens in-house, from raw steel to finished ceramic ferrule — so tolerances stay tight and batch-to-batch metallurgy stays consistent, eliminating the rework and failed inspections that outsourced production invites.
AWS D1.1, EN ISO 13918, ASTM A29, and CE compliance run across the entire catalogue, not just headline products — so whichever regional standard your project specifies, your paperwork clears authority submission the first time.
Studs and fasteners, welding equipment, and consumables are organized as three connected categories rather than a scattered parts list — so you specify a project's full material list from one catalogue instead of chasing multiple suppliers.
20+ years of production experience and 150+ factory staff give this system the depth to run small trial orders and large-volume programs side by side — so your sourcing plan can grow without switching suppliers.
Three Categories. One Sourcing Decision.
Every part your project needs to complete a stud weld falls into one of three categories. Each is engineered, tested, and stocked to move your project from specification to installation without a second supplier.
Shear studs, threaded weld studs, wear studs, and insulation pins in diameters from 6mm to 32mm — the structural and fastening core of every project, produced to AWS D1.1 and EN ISO 13918 tolerances so your dimensional inspection passes without remediation.
Explore Weld Studs & Fasteners
Welding guns, power units, chuck jaws, and foot assemblies sourced and matched from trusted OEM partners — components engineered to work together for a consistent arc, so your crew spends less time troubleshooting and more time welding.
Explore Stud Welding Equipment
Ceramic ferrules, arc shields, and flux-coated tips dimensionally matched to every stud diameter we produce — precise arc containment that means fewer porosity defects and more finished welds passed per shift, no matter which welding system you run.
Explore Consumables & AccessoriesNot sure which category covers your bill of materials? Send us your drawing and we'll map it out.
Talk to Our Product TeamWhich Category Fits Your Project?
Most projects draw from more than one category. Use this comparison to confirm scope before you request a quote — it saves a revision cycle on your purchase order later.
| Category | Core Function | Typical Applications | Standards Met |
|---|---|---|---|
| Weld Studs & Fasteners | Structural bonding, shear transfer, and mechanical fastening between steel and concrete or steel-to-steel assemblies. | Composite floor decks, bridge girders, steel frame structures, insulation anchoring, HVAC attachments. | AWS D1.1 · EN ISO 13918 |
| Stud Welding Equipment | Powering, controlling, and delivering the arc that fuses studs to base material with repeatable weld quality. | Field installation on job sites, in-line production welding, shipyard and fabrication shop welding stations. | CE · IEC Compliant |
| Consumables & Accessories | Arc containment and process support that keeps every weld clean, regardless of which stud type or equipment is used. | Required alongside every stud welding project — ceramic ferrules and flux tips are consumed on every single weld. | ISO 9001 QC System |
Still weighing category scope against your project drawing? Our engineers will confirm it in writing.
Get a Scope ConfirmationBuilt for Every Structural Application
The same catalogue serves fabricators, contractors, and procurement teams across six distinct industries — because dimensional consistency and certified documentation matter equally, whether the stud sits inside a bridge deck or a mining conveyor.
Composite deck shear studs and weld studs delivered to ±0.3mm tolerance, so slab thickness inspections pass on the first attempt across every floor.
EN ISO 13918 and AWS-certified shear connectors with full mill certification, ready for authority submission on cable-stayed, girder, and composite deck projects.
Corrosion-resistant threaded studs and marine-grade fasteners built to withstand salt exposure without sacrificing weld strength on hull and deck assemblies.
Hardened wear studs rated HRC 45–62 for chute liners, bucket lips, and crusher plates — extending equipment service life in the harshest abrasive environments.
316L stainless insulation pins engineered for cryogenic and high-temperature anchoring, tested to eliminate corrosion in LNG tank and industrial insulation applications.
High-strength weld studs and shear connectors for wind tower internals and solar mounting structures, matched to project-specific load and fatigue requirements.
Don't see your industry listed? Our engineers have likely solved a similar application already.
Discuss Your ApplicationBuilt to Produce at Scale
Every category in this catalogue is made possible by one production environment: cold heading, CNC threading, heat treatment, plating, and ceramic kiln firing running under a single roof. That means the lead time you're quoted reflects real production capacity, not a coordination guess between subcontracted vendors.
- Cold heading lines: Ø6mm–Ø32mm range
- CNC threading: M6 to M24, metric & UNC
- In-house heat treatment furnaces
- Zinc plating & hot-dip galvanizing
- Automated dimensional inspection
- Ceramic ferrule kiln firing
- Dedicated OEM production cells
- Customer inspection visits welcome
Want to see this production line before committing to an order?
Arrange a Factory Visit Request Capability ReportQuality Control You Can Verify
Across all three product categories, quality gates are embedded through production rather than checked only at the end of the line — so a defect is caught at the station where it happens, not after it has shipped to your site.
Incoming steel and ceramic material verified for composition and tolerance before production begins.
Automated gauging at heading and threading stations catches dimensional drift in real time.
Tensile, proof load, and torque testing on representative samples from every production batch.
Coating thickness and finish inspected on each run, including ceramic ferrule glaze integrity.
Final count, packaging integrity, and document bundle review before every container is sealed.
Quality management system covering design, production, inspection, and delivery across all product categories.
European standard compliance for welding studs and ceramic ferrules, required for structural steel projects.
American Welding Society structural welding compliance, covering headed stud geometry and welding procedure qualification.
Material and conformity compliance for bar stock steel grades and equipment sold into CE-marked jurisdictions.
Need to verify our quality system before placing your first order?
Request Quality Documents Schedule Factory AuditYour Spec.
Our Factory.
When a project needs a non-standard diameter, a proprietary head geometry, a specific alloy grade, or private-label packaging across any of the three categories — studs, equipment, or consumables — our engineering team builds exactly what the drawing specifies, with sample approval before bulk commitment.
Share your drawing or spec across studs, equipment, or consumables for engineering review.
Feasibility confirmed and a detailed quotation issued within 24 hours.
First-article samples produced with a full dimensional report for your approval.
Approved tooling locked in; production proceeds under standard QC documentation.
Shipment dispatched with full certification; technical support continues post-delivery.
Have a non-standard requirement in any category? Our engineers are ready to review your drawings.
Submit OEM Inquiry Download OEM CapabilitiesSupply That Crosses Borders
From a steel fabricator in Houston to a bridge contractor in Melbourne to a mining operation in Johannesburg — every product category on this page ships reliably to 60+ countries, backed by export infrastructure built for speed and compliance.
United States, Canada, Mexico, Brazil, Chile, Colombia, Peru, Ecuador, Bolivia, Argentina
Key Market: USA · CanadaGermany, UK, France, Poland, Netherlands, Italy, Spain, Belgium, Czech Republic, Romania
Key Market: Germany · UKJapan, South Korea, India, Australia, New Zealand, Thailand, Malaysia, Singapore, Vietnam
Key Market: Japan · AustraliaUAE, Saudi Arabia, Qatar, Oman, Turkey, Kazakhstan, Uzbekistan, Pakistan
Key Market: UAE · TurkeySouth Africa, Nigeria, Egypt, Kenya, Algeria, Morocco, Ethiopia, Ghana, Zambia
Key Market: South Africa · EgyptFOB, CIF, EXW, DDP terms available. Sea freight, air express, courier delivery for any product category.
All Major Incoterms SupportedComplete export packages including commercial invoices, packing lists, certificates of origin, and test certificates.
Production scheduling aligned to your project timeline, with lead time commitments honored at dispatch.
English-language export team available via email, WhatsApp, and video call — no translation delays.
FOB, CIF, EXW, and DDP supported — work with your preferred freight forwarder or ours.
Sourcing for a project outside China? Tell us your destination and timeline.
Get a Shipping & Supply QuoteHave a specific requirement not covered here? Our engineers are one message away.
Ask a Product QuestionTake the Full Specification Offline
Every catalogue below carries complete dimensional drawings, material grades, and standards references — so your engineering team can specify a part number without waiting on a reply, and your procurement team can attach a verified document to the purchase order.
Every stud, fastener, equipment item, and consumable across all three categories in one document — the fastest way to brief your team or a new procurement contact.
Download PDFFull dimensional range for shear studs, threaded studs, wear studs, and insulation pins, cross-referenced against AWS D1.1 and EN ISO 13918.
Download PDFWelding guns, power units, and chuck jaw compatibility charts, matched to stud diameter and application so equipment orders arrive correctly configured.
Download PDFCeramic ferrule sizing charts matched to every stud diameter we produce, plus flux tip and replacement part reference numbers for reordering.
Download PDFOur technical team can issue custom dimensional drawings and documentation for any non-standard configuration within 3 business days of your request.
Request a Product Quote
Whether you need a straightforward price on catalogue studs, a compatibility check on welding equipment, or an OEM quotation across all three categories — our team responds with substance, not boilerplate. Expect a real answer within one business day.
-
Factory AddressZOCIndustrial Manufacturing Base
Jiangsu Province, China -
Email
-
WhatsApp / Phone
-
Response TimeQuote within 12–24 business hours
Technical queries within 24 hours
Fill in your requirements below. Our team will respond with pricing, lead time, and any technical recommendations within one business day.